What Do You Do To Know If You re Prepared To Go After Ghost Immobiliser Problems

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will protect your prized item from theft. This system is discreet & doesn't require additional key fobs in order to operate.

The device utilizes buttons on your vehicle (steering wheels, door ghost immobiliser Problems panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This then authorizes the start-up of your vehicle.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are many types of security devices that are sold aftermarket including tracking systems, immobilisers and alarms. However they do not all are equally efficient in protecting your vehicle. A tracking device can aid in finding your vehicle in the event of it being stolen however, it won't stop the crime. Immobilisers, however, do exactly what they say on the label - they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your vehicle.

The Ghost Immobiliser Problems device makes use of the buttons on your car to create a unique sequence which must be entered in order for the engine to begin. This can be done via the indicator stalk, window or heater buttons. In addition to this option, there is a mobile app which can act as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is a great solution when you wish to donate your car to valet parking or for maintenance. The immobiliser remains in operation.

The Ghost is an innovative and unique device that operates with the buttons of your vehicle instead of as a standalone unit. It is not only an effective deterrent for vehicle theft, but it can also be used on any future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is an advanced security device that protects your car from key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to ensure it works with all vehicles. It is also immune to jamming devices that are a popular technique used by thieves to bypass immobilisers.

The advantage of CAN data over traditional systems is that they operate in a silent manner. It cannot be detected using sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console, or doors, to create a unique disarming sequence. You can even create a sequence that is up to 20 presses long to provide additional security. The iPhone app allows only one connection, with a unique pairing code for the Ghost. All communication between the two devices is protected.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine will only run if a valid PIN code has been entered. It is possible to operate temporarily in Valet/Service mode (with parameters set, such as a 30mph speed limit) which means you can hand your car to a valet or service without needing to enter a code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals that block your car's system from performing its normal startup routine until you input a custom passcode. The system can be turned off or on through your smartphone's app, without the need for extra wires.

Standard factory immobilisers for automobiles function through an electronic transponder in the key that sends an indication to the ECU. The car will start when the correct code is sent. However, if a transponder from another vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be started and stolen. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It shields your car from hacking, key cloning and even key theft. The only way that a burglar could take your car is physically towing it away and even then they would not be capable of driving it.

Ghost uses the buttons in your vehicle, including the indicator stalk, steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered before you are able to use your car. This is done without any additional hardware, like a keyfob. It can take up to 20 presses. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that a system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, ghost ii immobiliser is covertly integrated into the vehicle to ensure that it can't be removed or disabled by thieves. It's even more difficult to get rid of from a car alarm which requires disarming via the use of a button sequence. This makes it a great supplement to a GPS tracker which helps locate your car after it's been taken.

Emergency PIN code override

You don't need to go far on social media to find stories or even videos of vehicles that have been taken by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow them to start your vehicle without your original key fobs.

Our Ghost immobiliser combats this and gives you an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and centre console. This unique PIN is entered in conjunction with your original key fob in order to prevent the engine from beginning. The unique override pin can be found on the black card that you will receive following installation and is easy to remember because there aren't any LEDs.

The device is hidden in the vehicle's wiring and does not emit radio signals, so it isn't able to be detected by modern criminals using diagnostic software that can identify the security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike most other security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This enables them to shut down the vehicle completely through a digital block of commands for both the ECU and the engine.

These systems can also be connected to a separate analogue alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with valet/service modes and is a great alternative to a tracker device when you take your car into the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years, there has been a increase in vehicles stolen without the owner's keys. With easy access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your prized possessions. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your car has been hijacked.

It directly communicates with your cars ECU (Engine Control Unit) through the CAN data circuit. It is completely silent since it doesn't use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also protects you from introducing a new ECU or key to bypass the system since only the PIN code allows the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, the centre console and door panels. Before you can begin your car, you must enter a unique and reversible PIN code that can be as long as 20 digits.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being started or driven away without a PIN code being entered first. If the device is in armed and you attempt to drive away, it will display an indication on your dash, which will flash continuously for about 300m. If you type in your PIN code during this time, it will disable the anti-hijack device and your car will continue to drive as normal. If you don't enter your PIN at this time, the indicator will continue to flash and require a new PIN every time you attempt to start your car.